[$is_event_jimu]
2
[$group_e]
元件事件库.脉宽测量

[$group]
元件库-传感器.$pname$
[$last_ver_update_time]
2021-04-03
[$min_need_ver]
1.23
[$p_list]

[$short_show_UIname]

[$code_area_type]
codes,exe_per_1ms,init_code
[$blocks_type]
line

[$name]
脉宽测量器的初始化积木

[$引脚占用列表，用于提示冲突]
外部中断输入#replace(  "[($_xgm$extline),type=num]" ,"extline" ,"")%  |脉宽测量积木里已占用此外部中断



[$寄存器占用列表，用于提示冲突，但=>后的值没变则不提示冲突]





[$中断函数号占用列表，用于提示冲突]




[$interrupt_1]




[$thread_do]

 



[$cs]


[$function_ref_define_in_headfile]
@@file=pulwidth.h


extern u8 is_geted_pul_end_ed_$rnd_varname_pre$;
extern u8 is_geted_pul_start_ed_$rnd_varname_pre$;

extern u32 pul_width_$rnd_varname_pre$;
extern u8 dianpin_$rnd_varname_pre$;
extern u32 Fpul_width_$rnd_varname_pre$;

u32 get_pul_width_val_$rnd_varname_pre$();

 void a_t_callback_$rnd_varname_pre$();
 
 
[$init_code_for_define_area_once]
@@file=pulwidth.c





[$init_code_for_define_area]
@@file=pulwidth.c



#include "protothread.h"
#include "app_process.h"
#include "sys/timer.h"
#include "Extline_Lib.h" 
#include "Lib_base.h"  //考虑PROCESS2_WAIT_UNTIL宏


u32 Fpul_width_$rnd_varname_pre$=0;

u8 dianpin_$rnd_varname_pre$=0;

u8 is_geted_pul_end_ed_$rnd_varname_pre$=0;
u8 is_geted_pul_start_ed_$rnd_varname_pre$=0;

u32 pul_width_$rnd_varname_pre$=0;


u32 get_pul_width_val_$rnd_varname_pre$(){




  if(is_geted_pul_end_ed_$rnd_varname_pre$==0){
  
  
    // return 0;
  
   }



  return Fpul_width_$rnd_varname_pre$;
  





}


  void a_t_callback_$rnd_varname_pre$(){
  


         dianpin_$rnd_varname_pre$ = TT_get_extline_pin_value([($_xgm$extline),type=num] ,[($_xgm$port),type=num]);

 
       if(is_geted_pul_start_ed_$rnd_varname_pre$==0 &&  dianpin_$rnd_varname_pre$==1){

                   pul_width_$rnd_varname_pre$=0;
   
                  is_geted_pul_end_ed_$rnd_varname_pre$=0;
				  
   
                is_geted_pul_start_ed_$rnd_varname_pre$=1;





             
         }else if(is_geted_pul_start_ed_$rnd_varname_pre$==1 &&  dianpin_$rnd_varname_pre$==0){
   
                 if(pul_width_$rnd_varname_pre$>0){
                      Fpul_width_$rnd_varname_pre$=pul_width_$rnd_varname_pre$;
                  }
				  
				  
				  
                  is_geted_pul_end_ed_$rnd_varname_pre$=1;
				  
				  
                is_geted_pul_start_ed_$rnd_varname_pre$=0;
 

 





        }
		
		
		
		}



[$init_code_for_init_val]

     Fpul_width_$rnd_varname_pre$=0;
	 
	 
      is_geted_pul_start_ed_$rnd_varname_pre$=0;

     is_geted_pul_end_ed_$rnd_varname_pre$=0;

      pul_width_$rnd_varname_pre$=0;    
  





  //    IT0=0;      // 设置成上升沿和下降沿均触发
  
 
TT_init_from_jimu(  [($_xgm$extline),type=num]  ,   [($_xgm$port),type=num]  ,3   );

TT_reg_callback_for_extline_use_timer_enum(   [($_xgm$extline),type=num]  ,a_t_callback_$rnd_varname_pre$      );




[$timer0_1ms_code]

  


[$timer0_100us_code]

if(is_geted_pul_start_ed_$rnd_varname_pre$==1){


pul_width_$rnd_varname_pre$=pul_width_$rnd_varname_pre$+100;


}



[$toolbox_block_code]


<block type="drv_pul_width_init2">



</block>






[$replace_map]

$_xgm$dev_no = $field$dev_no,mytype|num, ptype|TIMES


$_xgm$extline = $field$extline ,mytype|num, ptype|TIMES

$_xgm$port = $field$port ,mytype|num, ptype|TIMES