[$group]
元件库-执行器.$pname$
[$min_need_ver]
1.23
[$name]
duoji_ctrl_set
[$shared_func_In_main_c]

[$cs]
inset_$rnd_varname_pre$=[($_xgm$datjiaodu),type=num];

if(inset_$rnd_varname_pre$<=0){

inset_$rnd_varname_pre$=0;


}

if(inset_$rnd_varname_pre$>=90){

inset_$rnd_varname_pre$=90;


}


pul_width_10us_$rnd_varname_pre$= (u8)( (((float)inset_$rnd_varname_pre$-45.00)/90.00)*100.00  + 150.00)/2;//中位45度时 约为1.5ms(150*10us=1.5ms)，0度时约为1ms(100*10us=1.0ms),90度时约为2.0ms (200*10us=2ms)





pwn_t2_$rnd_varname_pre$=200 - 2*(u8)(pul_width_10us_$rnd_varname_pre$/10 );//2000*10us=20ms，
[$toolbox_block_code]
<block type="duoji_ctrl_set"></block>
[$last_ver_update_time]
2022/12/10 0:07:26
[$code_area_type]
codes,exe_per_1ms,init_code
[$blocks_type]
line
[$replace_map]
$_xgm$dev_no_to_use = $field$dev_no_to_use,mytype|num, ptype|TIMES
$_xgm$datjiaodu = $value$datjiaodu,mytype|num, ptype|TIMES